Clutch Casing Cover Instructions

1.  Remove brake pedal

2.  Clean clutch hub with MILD solvent

3.  Before removing sticker back, align cover and mark with masking tape

4.  Apply silicone liberally on the inside perimeter of the cover, leaving a 2 cm gap on the bottom for drainage

5.  Remove sticker back and press firmly into place holding in position for several minutes

6.  Allow 72 hours for adhesive to bond

  WARNING
  *Sticker will not re-seal!

Questions? Call Jay @ 763-263-9835 or E-mail jay@hyderacing.com