dB Dawg™ 8002

dB Dawg™ 8002

$57.20
Product Code: dBD8002
Stock 18

Remove the BARK not the BITE!

  •  dB Dawg™ 4 Stroke Silencer Insert - External Fit
  •  Exhaust outlets from 1.50" to 1.75"
  •  Reduces noise levels up to 10 dB with just the insert
  •  No exhaust modifications are needed

How does the dB Dawg™ work?

Air will take the path of least resistance, but sound needs to hit something to cancel it out. The dB Dawg™ is designed in such a way (with the flat end and angled corners) that when the sound waves hit the end of the insert some of them cancel out and others bounce back into the packing of the muffler which are also cancelled out - this is also why you may need to replace the packing more frequently. The length of the shaft and the outlet hole are all exact calculations for maximum noise reduction and minimum power loss. Altering the insert in any way will render it less if not totally ineffective.

RIDERS can install the dB Dawg™ in minutes and ride at their favorite track or riding area while helping reduce exhaust noise with no noticeable power loss. Don't be turned down at the track or race because your bike failed the sound test, install the dB Dawg™ and RIDE!

Trent Janson 01/16/2019

Great option to keep your bike quiet ... and public riding areas open as a result. It took under 5 minutes to install using the allen key that came with it.

Jack Demers 01/14/2019

I have been using this dB Dawg for over a year. Overall I am satisfied with the performance of such a simple, but important, piece of equipment.

David Zeppieri 01/11/2019

dB Dawg is an easy way to pass sound emissions previously unreachable from my bike.

Jerry Neighbors 01/02/2019

dB Dawg, what a great and easy way to manage your noise output. Quick install, you can't beat it!

Laura Vanheel 08/28/2015

Bought this for my 2002 Yamaha YZ250F. I didn't like how loud the bike was. Even with stock exhaust, the bike was fairly loud, especially when you would give it some good throttle, it would bark very loud. This takes the bark out of it dang near completely and it seems a little quieter when normally riding. I measured the actual muffler diameter and it matched this one. So I bought it and it fits well. I have been riding the dirt bike with this on it for about a month and a half, riding about 5 times a week, and it has not moved at all or fell out. I have not had to re-jet my bike or adjust the carb at all. It does run a little richer, but it really does not take away that much performance and the bike most of the time starts on the first kick now, hot or cold. I would recommend this product to anyone looking for a quieter bike.

Write a review

Note: HTML is not translated!

Rating Bad           Good
Captcha

Installation instructions for your dB Dawg™ 8002

Go to dB Dawg™ 8002 instructions

Download Printable pdf

Related Products